+39 0883 661503 info@teco-europe.com

PRODUCT RANGE

PRODUCT FEATURES

  • Four base options available, 4.5 mm Barb, 10-32 UNF Male Thread, ½” NPT Female Thread and 150 mm Spike.
  • Cap rotation adjusts flow and radius.
  • Large adjustment range gives a greater control of flow rate and diameter of throw than fixed flow emitters.
  • Quick ON-OFF action.

GENERAL APPLICATIONS

Use for watering plants in small or large pots, planter boxes and also shrubs and trees in garden beds and landscaped areas.

 

 

 

PRODUCT FEATURES

  • Four base options available, 4.5 mm barb, 10-32 UNF Male Thread, ½” NPT Female Thread and 150 mm Spike.
  • Cap rotation adjusts flow and radius.
  • Large adjustment range gives a greater control of flow rate and radius of throw.
  • Quick ON-OFF action.

GENERAL APPLICATIONS

  • Use for watering plants in small or large pots and planter boxes.
  • Ideal for border watering in garden beds and landscaped areas

 

PRODUCT FEATURES

  • Two PC Spikes are available:
  1. End-Line
  2. In-Line
  • Two Caps available:
  1. Ottima™ 180° 5 Stream
  2. Ottima™ 360° 8 Stream
  • The Ottima™ 180°, PC, 5 Stream. End-Line Spike is available in three disharge rates, Colour Coded for easy identification.
  1. 20 lph (Black)
  2. 30 lph (Orange)
  3. 40 lph (Blue)
  • The Ottima™ 180°, PC, 5 Stream. End-Line Spike is available in three disharge rates, Colour Coded:
  1. 20 lph (Black)
  2. 30 lph (Orange)
  • The Ottima™ 360°, PC, 8 Stream, End-Line Spike is available in two discharge rates, Colour Coded:
  1. 30 lph (Orange)
  2. 40 lph (Blue)
  • The Ottima™ 360°, PC, 8 Stream, In-Line Spike is available in one discharge rate, Colour Coded:
  1. 30 lph (Orange)
  • Pre-defined discharge rates that mantain uniform output flow rate and diameter of throw.

GENERAL APPLICATIONS

  • Use for watering plants in small or large pots, garden beds and landscaped areas.

PRODUCT FEATURES

  • Four base options available, 4.5 mm Barb, 10-32 UNF Male Thread, ½” NPT Female Thread and 150 mm Spike.
  • Cap rotation adjusts flow and radius.
  • Effective watering at the root zone.
  • Easy to regulate the water flow.
  • Umbrella pattern remains uniform during cap rotation and at all pressures.
  • The Mini Bubbla 360° PC Spike is available in one discharge rate, 75 lph, colour coded (Red).

GENERAL APPLICATIONS

  • Use for watering plants in small or large pots, garden beds, street tree and palms.

PRODUCT FEATURES

  • Turbulent flow path.
  • Two Key types available:

1. End-Line adjustable 0-6 lph (black key)

2. In-Line adjustable 0-6 lph (brown key)

  • Two body types to choose from depending on the application. Standard body with 4,5 mm Inlet Barb. Spike with 4,5 mm Inlet Barb.
  • Finger tip key control for flow adjustment.
  • May be turned “OFF” when not in use.

GENERAL APPLICATIONS

  • May be used fo vegetable patches, home gardens, nurseries, pots and shrubs.

[Best_Wordpress_Gallery id=”10″ gal_title=”Delta Drip”]

PRODUCT FEATURES

  • Turbulent flow path
  • Two Spike versions available:
  1. End-Line
  2. In-Line
  • Three Spike versions available for each Spike type, Colour Coded for easy identification:
  1. 2 lph (Red)
  2. 4 lph (Black)
  3. 8 lph (Green)
  • End-Line Spikes with 4,5 mm Inlet Barb
  • In-Line Spikes with 4,5 mm Inlet & Outlet Barb


GENERAL APPLICATIONS

  • May be used for vegetable patches, home gardens, nurseries, balconies and patios.

FILTRATION REQUIREMENTS

  • Drip Emitters: 100 microns (150 mesh)

delta drip spike 2 

PRODUCT FEATURES

  • Turbulent flow path.
  • Self piercing 4.5 mm barb with sharp needle for quick and easy installation.
  • Four flow rates are available. Colour Coded for easy identification:
    1 l/h (Brown), 2 l/h (Red), 4 l/h (Black) and
    8 l/h (Green)


GENERAL APPLICATIONS

  • May be used for vegetable patches, home gardens, nurseries, balconies and patios.

FILTRATION REQUIREMENTS

  • Drip Emitters: 100 microns (150 mesh)

TECO WILL BE ACQUIRED BY NORMA GROUP
TECO signed an agreement to be acquired by NORMA Group, an international market leader in engineered and standardized joining and fluid-handling technology. The acquisition is scheduled to be completed in early 2024…
Share This